This 9-minute video describes our family’s trips around the world to witness solar eclipses, with the culmination August 21st, 2017 of our experiences in Prairie City, a small town in eastern Oregon.
We viewed the solar eclipse of August 21, 2017 from Prairie City, Oregon, about 5 miles from the centerline of the path of totality. This video includes a time-lapse sequence of the partial phases (about an hour-and-a-quarter real time into 20 seconds) and still frames of totality ( which lasted 2 minutes 9 seconds).
Sunspots are visible during the partial eclipse phases. The diamond ring and Baily’s Beads are visible just before totality. The corona and solar prominences can be seen during totality, and the bright star Regulus in the constellation Leo is visible to the left.
Images were captured using a Canon EOS 6D camera attached to a Takahashi FSQ-106 telescope on an iOptron CEM25 mount. The camera was controlled by a Windows 10 PC running Eclipse Orchestrator Pro v. 3.7.2017/06/14 from Moonglow Technologies. Accurate timing and geographic location information were obtained using a Garmin GPS 18x USB device. The computer was connected to the camera using two cables: A camera interface cable, IFC-200U from Canon and a DSUSB shutter control adaptor from Shoestring Astronomy. A solar filter from Orion Telescopes & Binoculars was fitted over the aperture of the telescope during the partial phases.
On September 27, 2015 at dusk, we observed the full moon rising over the Cascade mountains when it was already in eclipse. At first it was difficult to see as the sky was not very dark yet. Then gradually as the moon rose and the sky darkened, the dark red orb became more apparent. As the moon moved through the Earth’s umbra shadow, patterns of brightness changed until it finally emerged as our familiar bright full moon.
These images were taken with a Canon 6D DSLR camera with an f/4 300mm fixed lens on a tripod.